News

In a perfect world, all four tires would wear out at the same time. In the same perfect world, everyone would be able to afford a whole set of tires all at once. Unfortunately, things often just do not work out that way.  Sometimes you may just have to replace tires as you can afford them, one or two at a time, but there are some important things to bear in mind if you have to do that.  If you can only afford to replace one or two tires, it’s essential that you go with tires that are identical...

Every year, about 290 million tires are discarded; of those, about 233 million are recycled in one way or another. Shredded tires can be used for playground surfaces, welcome mats, hot-melt asphalt, bark mulch and even made into building material for “green” construction. But what can you do with your old tires? Here are some ideas: --Fill a tractor tire with sand to make a great sandbox for kids --Hang a tire from a rope as a tire swing --Stack a couple of tires on top of each other, bolt th...

Ever wonder what the designations stamped on your tire sidewall actually mean? We’d like to break it down for you. Let’s take for instance, “P195/60R15 87S”. This is a full service description of a tire. In this case, “87S” denotes a tire’s load capacity and speed rating. The higher the number, the greater the load capacity – an 87 load capacity means that tire can support 1,201 pounds. Speed ratings range from L (75 mph) through V (149 mph), and an S speed rating means the tire is good...

We know that a lot of drivers are working pretty hard to make a dollar go farther and that the outlay for a full set of four tires – even inexpensive tires – can be considerable. That’s why we run across drivers pretty often who ask if it’s okay to just replace a pair of tires, then buy the other pair when they can afford them. The answer is…yes, but… You’ll really need to pay attention to the size of the set of tires that you’ve already got and go with that exact same size of tires for...

1. For performance and handling, the trend has long been toward fatter tires with a bigger footprint. That’s starting to change, though. Skinnier tires mean lower rolling resistance and better fuel economy, as well as a smaller aerodynamic profile. While fatter tires do handle better, tire engineers are making up the difference by designing skinny tires with a stickier tread formulation for traction and cornering ability. 2. Static electricity used to be a real concern for vehicles; if you’re...

Even just a pound or two of underinflation in your tires can be a problem. Why, though? There are several reasons.  Fuel economy: If you ever rode a bicycle with a low tire, you know that it feels like you’re riding through wet cement due to the added rolling resistance. The same thing is happening with your car, and compromising your fuel economy. Over the course of 10,000 miles per year, that can add up to 150 gallons of gas or $500 out of your pocket! Handling: Low tire pressure means poor...

So you’re in need of a set of tires for your truck? No problem! The question is, though, what kind of tires are going to be best? First, you’ll need to think about what you use that truck for. Will you regularly be hauling heavy loads or pulling a trailer? Do you expect to keep it on the pavement for the most part, or will you occasionally go off-road? If you go off-road, will it be on soft dirt or will you be plowing through brush, mud, and rocks? And finally…what’s your budget? If you’re...

Your tires are a big investment, and while it’s easy to just take them for granted, you want them to last through their entire warranty phase (at least). Here are some tips on how to get the most life out of a set of tires: Tire rotations: No vehicle has 50/50 weight distribution from front to rear, and front tires see a different set of stresses from braking and cornering. Rotating your tires at a 5,000-mile interval ensures even wear and good drivability and handling. Proper inflation: Under...